Knauf D112 Suspended Gypsum Board Ceiling system with metal grid consists of lower/furring and upper/main CD channels.
Main channels are attached to the ceiling slab with hooked wires and rapid hangers. Upper/main CD channels are attached to lower/furring channels with Knauf Clips (Cross Connector) in the Knauf D112 System. The Knauf UD channel is installed flush on the existing bearing system of the building with anchoring screws (Screw Pin Fastener). This facilitates a proper alignment and installation of all base and bearing studs and channels. Knauf Gypsum Boards are installed on metal grids with screw attachment, starting at one end and gradually advancing towards the other. Knauf Joint Tape, included here in the product group of Knauf Accessories, is applied on Knauf board joints that are then filled in with Knauf Fuga Gips Jointing Compound.
KNAUF STANDARD PARTITION WALL SYSTEM:
Knauf Standard Partition Wall System is formed by fixing Knauf Gypsum board of single-layer or multi-layers on single-layer stud frame, which can provide the most light, concise and economic space dividing solution with high insulation performance.
It is applicable for various commercial and residential buildings.
To meet different performance requirements through selecting different layers and Gypsum boards of various types.
The Knauf range of drywall partitions is the result of decades of experience in developing, testing and supporting warranted systems that meet the needs of the modern building.
Quickly and simply constructed from high quality, Knauf components, our partitions are guaranteed to perform. You can specify Knauf partitions safe in the knowledge that these components have been comprehensively tested together to ensure performance, and that our support extends from concept to site.