STEP 1:
Moving from left to right, fill the joint with Knauf’s Joint Bora plaster.
STEP 2:
Moving from the bottom to the top, fill the joint with Knauf’s Joint Bora plaster.
STEP 3:
Insert fiber / paper tape over the joint.
STEP 4:
Cover the fiber / paper tape by pressing with Joint Bora plaste.r
STEP 5:
Pause, wait for the joint to dry.
STEP 6:
Apply a second coat to level the joint area to the plasterboard surface with Finish Bora skimming plaster.
STEP 7:
Pause, wait for the levelling coat to dry.
STEP 8:
Skim the surface with Finish Bora.
STEP 9:
Pause, wait for the surface to dry.
STEP 10:
Sand till smooth.
Finish! A perfect, smooth and white joint done.
#JointBora #Jointing #JoinGypsumBoards #FinishBora #knauf #KnaufGypsumTanzania #tanzania #gypsumboard #gypsumproducts #germanquality #daressalaam #tanzania #tanzanianproducts #plasterproducts #plasterboard #ceilingboard #BodiYaJasi #Plasta #knaufboard #buildingmaterials #fundi #resellers #buildingprojects #architects #engineers #architecture #TanzaniaBureauOfStandards #HomeOwner #ConstructionCompanies
